Department of Mechanical System Design Engineering, Seoul National University of Science and Technology
232 Gongneung-ro, Nowon-gu, Seoul, 139-743, Korea Tel:+82-2-970-6351 / Fax:+82-2-974-8270
Copyright © Seoul National University of Science and Technology. All Rights Reserved.
Faculty
Name |
Cho Young-Hak |
MAJOR |
Bio-mems / NEMS |
TEL |
02-970-6361 |
E-mail |
yhcho@seoultech.ac.kr |
Biography
- Apr. 2002–Mar. 2005 The University of Tokyo, Japan Ph.D., Precision Mechanical Engineering Advisor: Dr. Beomjoon KIM Thesis: “A Study on Development of MEMS Device for Electrical and Physical Characterization of Single-cell”
- Oct. 2001–Mar. 2002 The University of Tokyo, Japan Research student, Precision Mechanical Engineering
- Mar. 1999–Feb. 2001 Seoul National University, Seoul, Korea M.S., Mechanical Engineering Advisor: Dr. Chong Nam CHU Thesis: “Whirling and wandering Motion in Drilling Center Drilled Holes”
- Mar. 1993– Feb. 1999 Seoul National University, Seoul, Korea B.S., Mechanical Engineering Advisor: Dr. Chong Nam CHU
- Oct. 2001–Mar. 2002 The University of Tokyo, Japan Research student, Precision Mechanical Engineering
- Mar. 1999–Feb. 2001 Seoul National University, Seoul, Korea M.S., Mechanical Engineering Advisor: Dr. Chong Nam CHU Thesis: “Whirling and wandering Motion in Drilling Center Drilled Holes”
- Mar. 1993– Feb. 1999 Seoul National University, Seoul, Korea B.S., Mechanical Engineering Advisor: Dr. Chong Nam CHU
Careers
- Mar. 2009–Present Seoul National Univ. of Science & Technology, Korea
Assistant Professor
- Oct. 2007–Feb. 2009 Texas A&M University, USA Postdoc Research Associate
- Sep. 2005–Aug. 2007 The University of Tokyo, Japan JSPS (Japanese Society for the Promotion of Science) Postdoctoral fellow in Institute of Industrial Science
- Apr. 2005–Aug. 2005 The University of Tokyo, Japan Post doctor in Institute of Industrial Science
- Apr. 2003– Mar. 2004 The University of Tokyo, Japan Research Assistant in Institute of Industrial Science
- Mar. 2001–Sep. 2001 Seoul National University, Seoul, Korea Research Assistant in Precision Engineering & Manufacturing Lab
Assistant Professor
- Oct. 2007–Feb. 2009 Texas A&M University, USA Postdoc Research Associate
- Sep. 2005–Aug. 2007 The University of Tokyo, Japan JSPS (Japanese Society for the Promotion of Science) Postdoctoral fellow in Institute of Industrial Science
- Apr. 2005–Aug. 2005 The University of Tokyo, Japan Post doctor in Institute of Industrial Science
- Apr. 2003– Mar. 2004 The University of Tokyo, Japan Research Assistant in Institute of Industrial Science
- Mar. 2001–Sep. 2001 Seoul National University, Seoul, Korea Research Assistant in Precision Engineering & Manufacturing Lab
Research Areas
MEMS fabrication (especially Bio-MEMS) and Nanofabrication
Bimorph thermal micro actuators for individual bio-cells measurement
Single-cell electrical impedance measurement
Single-cell electroporation & nanoporation for gene transfection
Nanochannel array fabrication for single molecule analysis
Nanoimprint and mold fabrication
Tribology for bio molecule detection
Silicon nanowire bridge array for biosensor and nano-heater
Temperature characterization of MEMS/NEMS devices
Bimorph thermal micro actuators for individual bio-cells measurement
Single-cell electrical impedance measurement
Single-cell electroporation & nanoporation for gene transfection
Nanochannel array fabrication for single molecule analysis
Nanoimprint and mold fabrication
Tribology for bio molecule detection
Silicon nanowire bridge array for biosensor and nano-heater
Temperature characterization of MEMS/NEMS devices
Teaching
Microsystem Process (1)(2), Sensor and Measurement, Non-traditional & Precision Machining Technology, Statics
BioMEMS, Nanomechatronics
BioMEMS, Nanomechatronics
Journal Papers
[21] Young Hun Kim and Young Hak Cho, “Development of Biodiesel Production Equipment from Animal Fats and Consideration for Reaction Condition of Animal Biodiesel”, Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 22, No. 1 (2013) 119-124
[20] W.S. Jung, Y.H. Cho, and K. Park, “Optimization of Ultrasonic Imprinting Using the Response Surface Method”, Transactions of Materials Processing, Vol. 22, No. 1 (2013) 36-41
[19] Sungman Kim, Younghak Cho, Junhyung Lee, Jihyoung Rho, and Daesung Lee, “A Study on the Electrical Characterization of Top-down Fabricated Si Nanowire ISFET”, Journal of the Korean Society for Precision Engineering, Vol. 30, No. 1 (2013) 128-133
[18] Young Hak Cho, Sung Dong Kim, and Jihong Hwang, “Curve-typed PMMA Nanochannel Fabrication using Polymer Layer Transfer and Collapse Technique”, Journal of the Korean Society for Precision Engineering, Vol. 29, No. 1 (2012) 114-120
[17] Young-Soo Seo, Kiyeon Lee, Young-Hak Cho, and Keun Park, “Replication Characteristics of Micro-Patterns according to the Vibration Transmission Direction in the Ultrasonic Imprinting Process”, Journal of the Korean Society for Precision Engineering, Vol. 29, No. 11 (2012) 1256-1263
[16] S.H. Park, W.I. Lee, S.N. Moon, Y.-E. Yoo, Y.H. Cho, “Injection molding micro patterns with high aspect ratio using a polymeric flexible stamper”, Express Polymer Letters, Vol. 5, No. 11 (2011) 950-958
[15] Y.H. Cho, J. Park, H. Park, X. Cheng, B.J. Kim, and A. Han, “Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing”, Microfluidics and Nanofluidics, Vol. 9 (2010) 163-170
[14] Y.H. Cho and B.J. Kim, “Single-cell Electroporation and Gene Transfection using MEMS-based Microdevice with Cantilever-type Microelectrode”, Journal of the Korean Society for Precision Engineering, Vol. 27, No. 5 (2010) 85-91
[13] Hyun Chul Kim, Jaewon Park, Younghak Cho, Hyunsoo Park, Arum Han, and Xing Cheng “Lateral-flow particle filtration and separation with multilayer microfluidic channels”, Journal of vacuum science & technology B, Vol. 27, No. 6 (2009) 3115-3119
[12] Huijie Hou, Lei Li, Younghak Cho, Paul de Figueiredo, and Arum Han, “Microfabricated Microbial Fuel Cell Arrays Reveal Electrochemically Active Microbes”, Plos One, Vol. 4, No. 8 (2009) e6570
[11] Younghak Cho, Hyun Soo Kim, A. Bruno Frazier, Zhuo G. Chen, Dong Moon Shin, and Arum Han, “Whole-Cell Impedance Analysis for Highly and Poorly Metastatic Cancer Cells”, IEEE Journal of Microelectromechanical Systems, Vol. 18, No. 4 (2009) 808-817
[10] Y.T. Cheng, Y.H. Cho, N. Takama, P. Löw, C. Bergaud, and B.J. Kim, “Simple fabrication of Si nanowire and its biological application”, Journal of Physics: Conference Series, Vol. 152 (2009) 012048
[9] Y.H. Cho, S.W. Lee, T. Fujii, and B.J. Kim, “Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule”, Microelectronic Engineering, Vol. 85/5-6 (2008) 1275-1277
[8] M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim, “Nanochannels for Manipulation of DNA molecule using Various Fabrication Methods”, Journal of Semiconductor Technology and Science (JSTS), Vol. 7, No. 4 (2007) 256-261
[7] Y.H. Cho, S.W. Lee, B.J. Kim, and T. Fujii, “Fabrication of silicon dioxide submicron channels without nanolithography for single biomolecule detection”, Nanotechnology, Vol.18, No. 46 (2007) 465303-465308 (Selected as cover page of Nanotechnology)
[6] Younghak Cho, Beomjoon Kim, Seokkwan Hong, Jeongjin Kang, “Fabrication and Characterization of Thermally Actuated Bimorph Probe for Living Cell Measurements with Experimental and Numerical Analysis”, Journal of Mechanical Science and Technology, Vol. 20 (2006) 297-309
[5] Y.H. Cho, T. Yamamoto, Y. Sakai, T. Fujii, and B.J. Kim, “Development of microfluidic device for electrical/physical characterization of single cell”, IEEE Journal of Microelectromechanical Systems, Vol. 15 (2006) 287-295
[4] 趙永學、高間信行、山本貴富喜、藤井輝夫、金範埈, “生体単一細胞の測定用のMEMSデバイスの開発”, 電気学会論文誌E, Vol. 126 (2006) 89-94
[3] Y.H. Cho, D. Collard, L. Buchaillot, F. Conseil, and B.J. Kim, “Fabrication and optimization of bimorph micro probes for the measurement of individual biocells”, Microsystem Technologies, Vol. 12 (2005) 30-37
[2] Y. Hoshi, T. Kawagishi, S. Kawai, D. Kobayashi, J. Kim, Y.H. Cho, S. Takeuchi, B. Kim, and H. Kawakatsu, “Observation of self-assembled monolayer using the lateral resonance of the cantilever in the contact and noncontact regions”, Japanese Journal of Applied Physics, Vol. 43 (2004) 4533-4536
[1] Younghak Cho, Tony Kuki, Yamato Fukuta, Hiroyuki Fujita, and Beomjoon Kim, “Fabrication of sharp knife-edged micro probe card combined with shadow mask deposition”, Sensors and Actuators A, Vol. 114 (2004) 327-331
[20] W.S. Jung, Y.H. Cho, and K. Park, “Optimization of Ultrasonic Imprinting Using the Response Surface Method”, Transactions of Materials Processing, Vol. 22, No. 1 (2013) 36-41
[19] Sungman Kim, Younghak Cho, Junhyung Lee, Jihyoung Rho, and Daesung Lee, “A Study on the Electrical Characterization of Top-down Fabricated Si Nanowire ISFET”, Journal of the Korean Society for Precision Engineering, Vol. 30, No. 1 (2013) 128-133
[18] Young Hak Cho, Sung Dong Kim, and Jihong Hwang, “Curve-typed PMMA Nanochannel Fabrication using Polymer Layer Transfer and Collapse Technique”, Journal of the Korean Society for Precision Engineering, Vol. 29, No. 1 (2012) 114-120
[17] Young-Soo Seo, Kiyeon Lee, Young-Hak Cho, and Keun Park, “Replication Characteristics of Micro-Patterns according to the Vibration Transmission Direction in the Ultrasonic Imprinting Process”, Journal of the Korean Society for Precision Engineering, Vol. 29, No. 11 (2012) 1256-1263
[16] S.H. Park, W.I. Lee, S.N. Moon, Y.-E. Yoo, Y.H. Cho, “Injection molding micro patterns with high aspect ratio using a polymeric flexible stamper”, Express Polymer Letters, Vol. 5, No. 11 (2011) 950-958
[15] Y.H. Cho, J. Park, H. Park, X. Cheng, B.J. Kim, and A. Han, “Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing”, Microfluidics and Nanofluidics, Vol. 9 (2010) 163-170
[14] Y.H. Cho and B.J. Kim, “Single-cell Electroporation and Gene Transfection using MEMS-based Microdevice with Cantilever-type Microelectrode”, Journal of the Korean Society for Precision Engineering, Vol. 27, No. 5 (2010) 85-91
[13] Hyun Chul Kim, Jaewon Park, Younghak Cho, Hyunsoo Park, Arum Han, and Xing Cheng “Lateral-flow particle filtration and separation with multilayer microfluidic channels”, Journal of vacuum science & technology B, Vol. 27, No. 6 (2009) 3115-3119
[12] Huijie Hou, Lei Li, Younghak Cho, Paul de Figueiredo, and Arum Han, “Microfabricated Microbial Fuel Cell Arrays Reveal Electrochemically Active Microbes”, Plos One, Vol. 4, No. 8 (2009) e6570
[11] Younghak Cho, Hyun Soo Kim, A. Bruno Frazier, Zhuo G. Chen, Dong Moon Shin, and Arum Han, “Whole-Cell Impedance Analysis for Highly and Poorly Metastatic Cancer Cells”, IEEE Journal of Microelectromechanical Systems, Vol. 18, No. 4 (2009) 808-817
[10] Y.T. Cheng, Y.H. Cho, N. Takama, P. Löw, C. Bergaud, and B.J. Kim, “Simple fabrication of Si nanowire and its biological application”, Journal of Physics: Conference Series, Vol. 152 (2009) 012048
[9] Y.H. Cho, S.W. Lee, T. Fujii, and B.J. Kim, “Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule”, Microelectronic Engineering, Vol. 85/5-6 (2008) 1275-1277
[8] M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim, “Nanochannels for Manipulation of DNA molecule using Various Fabrication Methods”, Journal of Semiconductor Technology and Science (JSTS), Vol. 7, No. 4 (2007) 256-261
[7] Y.H. Cho, S.W. Lee, B.J. Kim, and T. Fujii, “Fabrication of silicon dioxide submicron channels without nanolithography for single biomolecule detection”, Nanotechnology, Vol.18, No. 46 (2007) 465303-465308 (Selected as cover page of Nanotechnology)
[6] Younghak Cho, Beomjoon Kim, Seokkwan Hong, Jeongjin Kang, “Fabrication and Characterization of Thermally Actuated Bimorph Probe for Living Cell Measurements with Experimental and Numerical Analysis”, Journal of Mechanical Science and Technology, Vol. 20 (2006) 297-309
[5] Y.H. Cho, T. Yamamoto, Y. Sakai, T. Fujii, and B.J. Kim, “Development of microfluidic device for electrical/physical characterization of single cell”, IEEE Journal of Microelectromechanical Systems, Vol. 15 (2006) 287-295
[4] 趙永學、高間信行、山本貴富喜、藤井輝夫、金範埈, “生体単一細胞の測定用のMEMSデバイスの開発”, 電気学会論文誌E, Vol. 126 (2006) 89-94
[3] Y.H. Cho, D. Collard, L. Buchaillot, F. Conseil, and B.J. Kim, “Fabrication and optimization of bimorph micro probes for the measurement of individual biocells”, Microsystem Technologies, Vol. 12 (2005) 30-37
[2] Y. Hoshi, T. Kawagishi, S. Kawai, D. Kobayashi, J. Kim, Y.H. Cho, S. Takeuchi, B. Kim, and H. Kawakatsu, “Observation of self-assembled monolayer using the lateral resonance of the cantilever in the contact and noncontact regions”, Japanese Journal of Applied Physics, Vol. 43 (2004) 4533-4536
[1] Younghak Cho, Tony Kuki, Yamato Fukuta, Hiroyuki Fujita, and Beomjoon Kim, “Fabrication of sharp knife-edged micro probe card combined with shadow mask deposition”, Sensors and Actuators A, Vol. 114 (2004) 327-331
◾ Particle Separation in a Microchannel with a T-Shaped Cross-Section Using Co-Flow of Newtonian and Viscoelastic Fluids, MICROMACHINES, vol.14 No.10, 2023조영학
◾ A 50 mu m acoustic resonator microchannel enables focusing 100 nm polystyrene beads and sub-micron bioparticles, Sensors and Actuators: B. Chemical, vol.376 pp.132918~, 2023조영학
◾ Monodisperse Micro-Droplet Generation in Microfluidic Channel with Asymmetric Cross-Sectional Shape, MICROMACHINES, vol.14 No.1, 2023조영학
◾ Fabrication Methods for Microscale 3D Structures on Silicon Carbide, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2022조영학
◾ The Fabrication of a High-Aspect-Ratio Microfluidic Device for Microparticle Separation under Viscoelastic Fluid, Journal of the Korean Society for Precision Engineering, vol.39 No.10 pp.725~730, 2022조영학
◾ Elasto-Inertial Particle Focusing in Microchannel with T-Shaped Cross-Section, APPLIED SCIENCES-BASEL, vol.12 No.20 pp.10552~10552, 2022조영학
◾ Square microchannel enables to focus and orient ellipsoidal Euglena gracilis cells by two-dimensional acoustic standing wave, MICROCHIMICA ACTA, vol.189 No.9 pp.331~331, 2022조영학
◾ Inertia-Acoustophoresis Hybrid Microfluidic Device for Rapid and Efficient Cell Separation, SENSORS, vol.22 No.13 pp.4709~4709, 2022조영학
◾ 진공 척을 이용한 마이크로 LED 대량 전사 공정 개발, 마이크로전자 및 패키징학회지, vol.29 No.2 pp.121~127, 2022조영학
◾ Fabrication of Acoustophoretic Device with Lateral Polymer Wall for Micro-Particle Separation, Journal of the Korean Society for Precision Engineering, vol.39 No.5 pp.379~384, 2022조영학
◾ High-Aspect-Ratio Microfluidic Channel with Parallelogram Cross-Section for Monodisperse Droplet Generation, Biosensors, vol.12 No.2, 2022조영학
◾ Particle Focusing in a Straight Microchannel with Non-Rectangular Cross-Section, Micromachines, vol.13 No.2, 2022조영학
◾ A Super-Boosted Hybrid Plasmonic Upconversion Process for Photodetection at 1550 nm Wavelength, ADVANCED MATERIALS, 2021조영학
◾ Particle Focusing under Newtonian and Viscoelastic Flow in a Straight Rhombic Microchannel, MICROMACHINES, vol.11 No.11, 2020조영학
◾ Acoustofluidic microdevice for precise control of pressure nodal positions, MICROFLUIDICS AND NANOFLUIDICS, vol.34 No.12, 2020조영학
◾ Flow and solidification of semi-crystalline polymer during micro-injection molding, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.153, 2020조영학
◾ Liquid metal embedded real time microfluidic flow pressure monitoring sensor, SENSORS AND ACTUATORS A-PHYSICAL, vol.305, 2020조영학
◾ Fabrication of anisotropic wetting surface with asymmetric structures using geometrical similarity and capillary force, Micro and Nano Systems Letters, vol.7 No.1, 2019조영학
◾ Inertial focusing in a parallelogram profiled microchannel over a range of aspect ratios, Micro and Nano Systems Letters, vol.7 No.1, 2019조영학
◾ Development of a portable fluorescent detection device for microalgae, Journal of the Korean Society for Precision Engineering, vol.36 No.9 pp.901~906, 2019조영학
◾ Fabrication of microfluidic channels with various cross-sectional shapes using anisotropic etching of Si and self-alignment, APPLIED PHYSICS A-MATERIALS SCIENCE PROCESSING, vol.125 No.5, 2019조영학
◾ Fabrication of anisotropically oleophobic surface with inverse-tapered structure using micromolding in capillaries and microtransfer molding, Journal of the Korean Society for Precision Engineering, vol.36 No.4 pp.413~418, 2019조영학
◾ Fabrication of microchannel with parallelogram cross-section using Si anisotropic wet etching and self-alignment, Journal of the Korean Society for Precision Engineering, vol.36 No.3 pp.287~291, 2019조영학
◾ Microchannel Fabrication on Glass Materials for Microfluidic Devices, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.20 No.3 pp.479~495, 2019조영학
◾ A continuous-flow acoustofluidic cytometer for single-cell mechanotyping, LAB ON A CHIP, vol.19 No.3 pp.387~393, 2019조영학
◾ Absolute Threshold in Tactile Sensing of Step by Fingertip, 한국생산제조학회지, vol.27 No.6 pp.517~523, 2018조영학
◾ Single-cell compressibility quantification for assessing metastatic potential of cancer cells through multi-frequency acoustophoresis, MICROFLUIDICS AND NANOFLUIDICS, vol.22 No.6, 2018조영학
◾ Fabrication of Finger-squeezing Pump for Portable Lab-on-a-chip, Journal of the Korean Society of Manufacturing Technology Engineers, vol.27 No.3 pp.300~305, 2018조영학
◾ Wetting properties of hybrid structure with hydrophilic ridges and hydrophobic channels, APPLIED PHYSICS A-MATERIALS SCIENCE PROCESSING, vol.124 No.2, 2018조영학
◾ Highly Secure Plasmonic Encryption Keys Combined with Upconversion Luminescence Nanocrystals, ADVANCED FUNCTIONAL MATERIALS, vol.28 No.21, 2018조영학
◾ Wettability of microstructured Pyrex glass with hydrophobic and hydrophilic properties, SURFACE COATINGS TECHNOLOGY, vol.319 pp.213~218, 2017조영학
◾ Fabrication of PMMA Acoustophoretic Microfluidic Chip Using Plasma Assisted Bonding, 한국정밀공학회지, vol.34 No.5 pp.343~347, 2017조영학
◾ A superoleophobic surface with anisotropic flow of hexadecane droplets, Microsystem Technologies, vol.23 pp.421~427, 2017조영학
◾ Fast Thermal Response of Silicon Nanowire-Heater for Heat Shock Generation, International Journal of Precision Engineering and Manufacturing-Green Technology, vol.4 No.1 pp.45~52, 2017조영학
◾ Micro/Nano Surface Topography and 3D Bioprinting of Biomaterials in Tissue Engineering, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol.16 No.9 pp.8909~8922, 2016조영학
◾ Fabrication of a Silicon Nanostructure Array Embedded in a Polymer Film by using a Transfer Method, Journal of the Korean Society of Manufacturing Technology Engineers, vol.25 No.1 pp.62~67, 2016조영학
◾ Micro/nano-hybrid lens for enhancing light extraction using micro-milling and anodic aluminium oxide (AAO), Journal of Micromechanics and Microengineering, vol.26 No.1 , 2016조영학
◾ Single Si submicron wire photodetector fabricated by simple wet etching process, MaterialsLetters, vol.160 pp.562~565, 2015조영학
◾ 솔벤트 증기처리 Reflow를 이용한 폴리머 마이크로 렌즈 제작 및 특성고찰, 한국정밀공학회지, vol.32 No.3 pp.299~305, 2015조영학
◾ Temperature Distribution Measurement of Au Micro- Heater in Microfluidic Channel using IR Microscope, International Journal of Precision Engineering and Manufacturing, vol.16 No.2 pp.367~372, 2015조영학
◾ Fabrication of Superoleophobic Surface with Anisotropic Wettability Using Silicon Wafer, Journal of the Korean Society of Manufacturing Technology Engineers, vol.23 No.6 pp.533~538, 2014조영학
◾ Thermal characterisation of high-aspect-ratio nanoheaters using IR thermography, International Journal of Nanomanufacturing, vol.10 No.43226 pp.513~526, 2014조영학
◾ Broadband light absorption using a multilayered gap surface plasmon resonator, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, vol.116 pp.857~861, 2014조영학
◾ Flow instability of semicrystalline polymer melt during micro-injection molding, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.24 No.8 , 2014조영학
◾ Fabrication of a Ultrathin Ag Film on a Thin Cu Film by Low-Temperature Immersion Plating in an Grycol-Based Solution, Journal of the Microelectronics & Packaging Society, vol.20 No.2 pp.79~84, 2014조영학
◾ Broadband light absorption using a multilayered gap surface plasmon resonator, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, vol.116 pp.857~861, 2014조영학
◾ Microfluidic acoustophoretic force based, LAB ON A CHIP, vol.14 No.5 pp.947~956, 2014조영학
◾ Full Duplex Robot System for Transferring Flat Panel Display Glass, 한국생산제조시스템학회지, vol.22 No.6 pp.996~1002, 2013조영학
◾ Development of Automatic Wax-Ring Manufacturing System for Silk Coating, 한국생산제조시스템학회지, vol.22 No.3 pp.531~536, 2013조영학
◾ Surface Polishing of Polymer Microlens with Solvent Vapor, 한국정밀공학회지, vol.30 No.6 pp.644~649, 2013조영학
◾ Effects of Grooved Surface with Nano-ridges on Silicon Substrate on Anisotropic Wettability, 한국생산제조시스템학회지, vol.22 No.3 pp.544~550, 2013조영학
◾ Shape Error and Its Compensation in the Fabrication of Microlens Array Using Photoresist Thermal Reflow Method, 마이크로전자 및 패키징학회지, vol.20 No.2 pp.23~28, 2013조영학
◾ Facile fabrication of superhydrophobic poly(methyl methacrylate) substrates using ultrasonic imprinting, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.23 , 2013조영학
◾ Effects of Grooved Surface with Nano-Ridges on Amplification of Hydrophobic Property, Advanced Materials Research, vol.684 pp.26~31, 2013조영학
◾ Wafer Level Bonding Technology for 3D Stacked IC, 마이크로전자 및 패키징학회지, vol.20 No.1 pp.7~13, 2013조영학
◾ Optimization of Ultrasonic Imprinting Using the Response Surface Method, Transactions of Material Processing, vol.22 No.1 pp.36~41, 2013조영학
◾ Development of Biodiesel Production Equipment from Animal Fats and Consideration for Reaction Condition of Animal Biodiesel, Journal of the Korean Society of Manufacturing Technology Engineers, vol.22 No.1 pp.119~124, 2013조영학
◾ A study on the electrical characterization of top-down fabrication Si nanowire ISFET, Journal of the Korean Society for Precision Engineering, vol.30 No.1 pp.128~133, 2013조영학
◾ Replication characteristics of micro-patterns according to the vibration transmission direction in the ultrasonic imprinting process, Journal of the Korean Society for Precision Engineering, vol.29 No.11 pp.1256~1263, 2012조영학
◾ Curve-typed PMMA Nanochannel Fabrication using Polymer Layer Transfer and Collapse Technique, Journal of the Korean Society for Precision Engineering, vol.29 No.1 pp.114~120, 2012조영학
◾ Injection molding micro patterns with high aspect ratio using a polymeric flexible stamper, EXPRESS POLYMER LETTERS, vol.5 No.11 pp.950~958, 2011조영학
◾ Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing, MICROFLUIDICS AND NANOFLUIDICS, vol.9 pp.163~170, 2010조영학
◾ 멤스 기반의 캔틸레버 형 전극을 가진 마이크로 디바이스를 이용한 단일세포의 Electroporation 및 유전자 Transfection, 한국정밀공학회지, vol.27 No.5 pp.85~91, 2010조영학
◾ Lateral-flow particle filtration and separation with multilayer microfluidic channels, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, vol.27 pp.3115~3119, 2009조영학
◾ Lateral-flow particle filtration and separation with multilayer microfluidic channels, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, vol.27 pp.3115~3119, 2009조영학
◾ Fabrication of high-aspect-ratio polymer nanochannels using a novel Si nanoimprint mold and solvent-assisted sealing, Microfluidics and Nanofluidics, 2009조영학
◾ Whole-Cell Impedance Analysis for Highly and Poorly Metastatic Cancer Cells, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, vol.18 pp.808~817, 2009조영학
◾ Microfabricated microbial fuel cell arrays reveal electrochemically active microbes, PLoS ONE, vol.4 No.8 pp.0~0, 2009조영학
◾ Whole-Cell Impedance Analysis for Highly and Poorly Metastatic Cancer Cells, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, vol.18 No.4 pp.808~817, 2009조영학
◾ Microfabricated microbial fuel cell arrays reveal electrochemically active microbes, PLoS ONE, vol.4 No.8 pp.0~0, 2009조영학
◾ Simple fabrication of Si nanowire and its biological application, Journal of Physics: Conference Series, vol.152 No.0 pp.0~0, 2009조영학
◾ Simple fabrication of Si nanowire and its biological application, Journal of Physics: Conference Series, vol.152 No.0 pp.0~0, 2009조영학
◾ Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule, MICROELECTRONIC ENGINEERING, vol.85 No.5-6 pp.1275~1277, 2008조영학
◾ Fabrication of silicon dioxide nanochannel arrays without nanolithography for manipulation of DNA molecule, MICROELECTRONIC ENGINEERING, vol.85 No.5-6 pp.1275~1277, 2008조영학
◾ Nanochannels for Manipulation of DNA molecule using Various Fabrication Molecule, Journal of Semiconductor Technology and Science, 2007조영학
◾ Nanochannels for manipulation of DNA molecule using various fabrication molecule, Journal of Semiconductor Technology and Science, 2007조영학
◾ Fabrication of silicon dioxide submicron channels without nanolithography for single biomolecule detection, NANOTECHNOLOGY, vol.18 No.46, 2007조영학
◾ Fabrication of silicon dioxide submicron channels without nanolithography for single biomolecule detection, NANOTECHNOLOGY, vol.18 No.46, 2007조영학
◾ Development of microfluidic device for electrical/physical characterization of single cell, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, vol.15 No.2 pp.287~295, 2006조영학
◾ Fabrication and characterization of thermally actuated bimorph probe for living cell measurements with experimental and numerical analysis, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.20 pp.297~309, 2006조영학
Conference Papers
[28] Hyun Soo Kim, Younghak Cho, A. Bruno Frazier, Zhuo (G). Chen, Dong Moon Shin, and Arum Han, “Electrical impedance spectroscopy microsystem as a tool for cancer cell analysis”, Proceedings of ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology (NEMB2010), Houston, TX, USA, 7-10, February (2010)
[27] Hyunsoo Park, Younghak Cho, Arum Han, and Xing Cheng, “Lateral Flow Particle Filtration and Separation with Multilayer Microfluidic Channels”, The 53th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN2009), Marco Island, FL, USA, 26- 29, May (2009)
[26] Y.H. Cho, H. Park, H.S. Kim, X. Cheng, and A. Han, “Curved Polymer Nanochannel Fabrication Using PMMA Layer Transfer and Collapse”, Nanotech 2009, Houston, TX, USA, 3-7, May (2009) 170
[25] Y.H. Cho, J. Park, H. Park, X. Cheng, B.J. Kim, and A. Han, “Fabrication of High-aspect-ration Nanochannels Using Novel Nanoscale Silicon Mold and Solvent Assisted Sealing”, Nanotech 2009, Houston, TX, USA, 3-7, May (2009) 170
[24] H.S. Kim, Y.H. Cho, A.B. Frazier, G. Chen, D. Shin, and A. Han, “Whole Cell Impedance Measurement Analysis for Metastasis Discrimination Metastatic and Non-Metastatic of Head and Neck Cancer Cells”, The 22nd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2009), Sorrento, Italy, 25-29, January (2009)
[23] Y.T. Cheng, Y.H. Cho, N. Takama, and B.J. Kim, “Simple fabrication of Si nanowire and its biological application as nanoscale heat source”, MRS International Materials Research Conference, Chongqing, China, 9-12, June (2008) 170
[22] Y.T. Cheng, Y.H. Cho, K.Nakagawa, N. Takama, H. Kawakatu, S.J. Cho, Y. Akagi, and B.J. Kim, “Novel Fabrication of Si nanowire and its biosensor application” (Si ナノワイヤーの製作及びバイオセンサーへの応用), The 55th. Spring Meeting, The Japan Society of Applied Physics and related societies, No.3 (2008) 1414
[21] M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim, “Nanochannels for Single DNA Analysis Using Various Fabrication Methods”, Proc. of ISOCC2007 (International SoC Design conference), Seoul, Korea, 15-16, October (2007) 347-350 (Best paper awarded)
[20] Y.H. Cho, S.W. Lee, M.T. Hwang, T. Fujii, and B.J. Kim, “Fabrication of Silicon dioxide nanochannel arrays without nanolithography for single DNA detection”, MNE2007 (33rd International Conference on Micro- and Nano-Engineering), Copenhagen, Denmark, 23-26, September (2007) 331-332
[19] 黄文泰、李相旭、趙永學、高間信行、藤井輝夫、金範埈、 “Fabrication of nanochannels with electrode for analysis of single DNA molecule”, IEEJ Technical Meeting on Sensors and Micromachines 2007, 日本電気学会センサ・マイクロマシン(E)部門総合研究会、July (2007) 37-40
[18] Y.H. Cho, S.W. Lee, B.Le Pioufle, N. Takama, S. Takeuchi, T. Fujii, and B.J. Kim, “High-Throughput Single-cell Electroporation Microchip with THREE Dimensional Si Microelectrodes for Gene Transfection”, Proc. of the 14th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’07), Lyon, France, 10-14, June (2007) 939-942
[17] Hak-Min Wang, Younghak Cho, Takama Nobuyuki, Kap-Seung Choi, Hyung-Man Kim, and Beomjoon Kim, “Design, Numerical Analysis of Channel Flow and Fabrication of Flow Channels for High Performance of Micro Fuel Cells”, The 9th Korean MEMS Conference, Jeju, Korea, 5-7, April (2007) 398-401
[16] 趙永學、李相旭、 B.L. Pioufle、 高間信行、藤井輝夫、金範埈, “単一細胞のエレクトロポレーション用マイクロチップの開発と分析”, 東京大学生命科学研究ネットワークシンポジウム, November (2006)
[15] Younghak Cho, Bruno Le Pioufle, Nobuyuki Takama, and Beomjoon Kim, “A silicon-based single cell electroporation microchip for gene transfer”, Proceedings of 2006 International Conference on Microtechnologies in Medicine and Biology (MMB2006), Okinawa, Japan, 9-12, May (2006) 195-197
[14] Younghak Cho, Teruo Fujii, Hiroyuki Fujita, and Beomjoon Kim, “Impedance measurement of single bio-cell”, 4th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology (Seiken Symposium no.41), Switzerland, 17-18, October (2005)
[13] Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii, and B.J. Kim, “Characterization of single red blood cell using twin microcantilever type sensor array”, Proc. of the 13th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’05), Seoul, Korea, 5-9, June (2005) 1692-1695
[12] Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii, and B.J. Kim, “MEMS-based bio-chip for the characterization of single red blood cell”, IEEE-EMBS-MMB 2005, Hawaii, USA, 12-15, May (2005) 60-63
[11] Younghak Cho, Nobuyuki Takama, and Beomjoon Kim, “Fabrication of twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, Proceedings on the 21st. Sensor Symposium on Sensors, Micromachines and Applied Systems, Kyoto, Japan, 14-15, October (2004) 521-524
( 趙永學、高間信行、金範埈、赤血球の変形と電気的特性の測定用のツインマイクロカンチレバーアレーの製作 : 第21回 センサ・マイクロマシンと応用システム シンポジウム 講演概要集, pp.125)
[10] Younghak Cho, Nobuyuki Takma, Hiroyuki Fujita, and Beomjoon Kim, “A twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, Asia-Pacific Conference of Transducers and Micro-Nano Technology, Sapporo, Japan, 4-7, July (2004) 263-266
[9] Younghak Cho, Nobuyuki Takama, and Beomjoon Kim, “A twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, The 10th International Meeting on Chemical Sensors, Tsukuba, Japan, 11-14, July (2004) 346-347
[8] Y.H. Cho, D. Collard, L. Buchaillot, F.Conseil, and B.J. Kim, “Characterization of individual bio-cells with thermally actuated probe arrays”, Design, Test, Integration and Packaging of MEMS/MOEMS, Montreux, Switzerland, 12-14, May (2004)
[7] Younghak Cho, Seokkwan Hong, Jeongjin Kang, and Beomjoon Kim, “Characterization of thermally actuated bimorph probe for single cell measurements using numerical analysis”, The 6th Korean MEMS Conference, Jeju, Korea, 8-10, April (2004) 125-130
[6] K. Yamada, J.G. Kim, Y.H. Cho, and B.J. Kim, “Fabrication of nanostructures using novel nano patterning method combined with micro contact printing”, the 8th PNU-IIS Joint workshop on Production technologies, Tokyo, Japan, 15-16, December (2003) 53-57
[5] K. Yamada, Y.H. Cho, and B.J. Kim, “Fabrication of nano-structures using novel nano/micro contact printing technique”, The 2nd International Conference on NNT (Nanoimprint and Nanoprint Technology), Boston, Massachusetts, USA, 3-5, December (2003)
[4] 星泰雄、川井茂樹、小林大、金長吉、趙永學、竹内昌治、金範埈、川勝英樹、“カンチレバーのねじれ固有振動を用いた自己組織化単分子膜の観察”, 第64回応用物理学会学術講演会講演予稿集. No.2 (2003) 606
[3] 趙永學、高間信行、藤田博之、金範埈、“シャドウマスクを利用した鋭利な尖端を持つシリコンマイクロプローブカードの製作”, 精密工学会 第8回「知能メカトロニクス」ワークショップ講演論文集、平成15 年8 月21 - 22 日, 立命館大学理工学部, (2003) 51-56
[2] Y. Hoshi, S. Kawai, D. Kobayashi, J.G. Kim, Y.H. Cho, S. Takeuchi, B.J. Kim, and H. Kawakatsu, “Observation of self-assembled monolayer by using lateral resonance of the cantilever”, in Proc. of The 11th International Colloquium on Scanning Probe Microscopy, (2003) 105
[1] Younghak Cho, Tony Kuki, Yamato Fukuta, Hiroyuki Fujita, and Beomjoon KIM, “Si-based micro probe card with sharp knife-edged tips combined metal deposition”, Proc. of the 12th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’03), Boston, Massachusetts, USA, 8-12, June (2003) 774-777
[27] Hyunsoo Park, Younghak Cho, Arum Han, and Xing Cheng, “Lateral Flow Particle Filtration and Separation with Multilayer Microfluidic Channels”, The 53th International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN2009), Marco Island, FL, USA, 26- 29, May (2009)
[26] Y.H. Cho, H. Park, H.S. Kim, X. Cheng, and A. Han, “Curved Polymer Nanochannel Fabrication Using PMMA Layer Transfer and Collapse”, Nanotech 2009, Houston, TX, USA, 3-7, May (2009) 170
[25] Y.H. Cho, J. Park, H. Park, X. Cheng, B.J. Kim, and A. Han, “Fabrication of High-aspect-ration Nanochannels Using Novel Nanoscale Silicon Mold and Solvent Assisted Sealing”, Nanotech 2009, Houston, TX, USA, 3-7, May (2009) 170
[24] H.S. Kim, Y.H. Cho, A.B. Frazier, G. Chen, D. Shin, and A. Han, “Whole Cell Impedance Measurement Analysis for Metastasis Discrimination Metastatic and Non-Metastatic of Head and Neck Cancer Cells”, The 22nd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2009), Sorrento, Italy, 25-29, January (2009)
[23] Y.T. Cheng, Y.H. Cho, N. Takama, and B.J. Kim, “Simple fabrication of Si nanowire and its biological application as nanoscale heat source”, MRS International Materials Research Conference, Chongqing, China, 9-12, June (2008) 170
[22] Y.T. Cheng, Y.H. Cho, K.Nakagawa, N. Takama, H. Kawakatu, S.J. Cho, Y. Akagi, and B.J. Kim, “Novel Fabrication of Si nanowire and its biosensor application” (Si ナノワイヤーの製作及びバイオセンサーへの応用), The 55th. Spring Meeting, The Japan Society of Applied Physics and related societies, No.3 (2008) 1414
[21] M.T. Hwang, Y.H. Cho, S.W. Lee, N. Takama, T. Fujii, and B.J. Kim, “Nanochannels for Single DNA Analysis Using Various Fabrication Methods”, Proc. of ISOCC2007 (International SoC Design conference), Seoul, Korea, 15-16, October (2007) 347-350 (Best paper awarded)
[20] Y.H. Cho, S.W. Lee, M.T. Hwang, T. Fujii, and B.J. Kim, “Fabrication of Silicon dioxide nanochannel arrays without nanolithography for single DNA detection”, MNE2007 (33rd International Conference on Micro- and Nano-Engineering), Copenhagen, Denmark, 23-26, September (2007) 331-332
[19] 黄文泰、李相旭、趙永學、高間信行、藤井輝夫、金範埈、 “Fabrication of nanochannels with electrode for analysis of single DNA molecule”, IEEJ Technical Meeting on Sensors and Micromachines 2007, 日本電気学会センサ・マイクロマシン(E)部門総合研究会、July (2007) 37-40
[18] Y.H. Cho, S.W. Lee, B.Le Pioufle, N. Takama, S. Takeuchi, T. Fujii, and B.J. Kim, “High-Throughput Single-cell Electroporation Microchip with THREE Dimensional Si Microelectrodes for Gene Transfection”, Proc. of the 14th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’07), Lyon, France, 10-14, June (2007) 939-942
[17] Hak-Min Wang, Younghak Cho, Takama Nobuyuki, Kap-Seung Choi, Hyung-Man Kim, and Beomjoon Kim, “Design, Numerical Analysis of Channel Flow and Fabrication of Flow Channels for High Performance of Micro Fuel Cells”, The 9th Korean MEMS Conference, Jeju, Korea, 5-7, April (2007) 398-401
[16] 趙永學、李相旭、 B.L. Pioufle、 高間信行、藤井輝夫、金範埈, “単一細胞のエレクトロポレーション用マイクロチップの開発と分析”, 東京大学生命科学研究ネットワークシンポジウム, November (2006)
[15] Younghak Cho, Bruno Le Pioufle, Nobuyuki Takama, and Beomjoon Kim, “A silicon-based single cell electroporation microchip for gene transfer”, Proceedings of 2006 International Conference on Microtechnologies in Medicine and Biology (MMB2006), Okinawa, Japan, 9-12, May (2006) 195-197
[14] Younghak Cho, Teruo Fujii, Hiroyuki Fujita, and Beomjoon Kim, “Impedance measurement of single bio-cell”, 4th IIS/KIMM/EPFL Joint Symposium on Micro/Nano Science and Technology (Seiken Symposium no.41), Switzerland, 17-18, October (2005)
[13] Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii, and B.J. Kim, “Characterization of single red blood cell using twin microcantilever type sensor array”, Proc. of the 13th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’05), Seoul, Korea, 5-9, June (2005) 1692-1695
[12] Y.H. Cho, N. Takama, T. Yamamoto, T. Fujii, and B.J. Kim, “MEMS-based bio-chip for the characterization of single red blood cell”, IEEE-EMBS-MMB 2005, Hawaii, USA, 12-15, May (2005) 60-63
[11] Younghak Cho, Nobuyuki Takama, and Beomjoon Kim, “Fabrication of twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, Proceedings on the 21st. Sensor Symposium on Sensors, Micromachines and Applied Systems, Kyoto, Japan, 14-15, October (2004) 521-524
( 趙永學、高間信行、金範埈、赤血球の変形と電気的特性の測定用のツインマイクロカンチレバーアレーの製作 : 第21回 センサ・マイクロマシンと応用システム シンポジウム 講演概要集, pp.125)
[10] Younghak Cho, Nobuyuki Takma, Hiroyuki Fujita, and Beomjoon Kim, “A twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, Asia-Pacific Conference of Transducers and Micro-Nano Technology, Sapporo, Japan, 4-7, July (2004) 263-266
[9] Younghak Cho, Nobuyuki Takama, and Beomjoon Kim, “A twin microcantilever array for measurement of red blood cell deformability and electrical impedance”, The 10th International Meeting on Chemical Sensors, Tsukuba, Japan, 11-14, July (2004) 346-347
[8] Y.H. Cho, D. Collard, L. Buchaillot, F.Conseil, and B.J. Kim, “Characterization of individual bio-cells with thermally actuated probe arrays”, Design, Test, Integration and Packaging of MEMS/MOEMS, Montreux, Switzerland, 12-14, May (2004)
[7] Younghak Cho, Seokkwan Hong, Jeongjin Kang, and Beomjoon Kim, “Characterization of thermally actuated bimorph probe for single cell measurements using numerical analysis”, The 6th Korean MEMS Conference, Jeju, Korea, 8-10, April (2004) 125-130
[6] K. Yamada, J.G. Kim, Y.H. Cho, and B.J. Kim, “Fabrication of nanostructures using novel nano patterning method combined with micro contact printing”, the 8th PNU-IIS Joint workshop on Production technologies, Tokyo, Japan, 15-16, December (2003) 53-57
[5] K. Yamada, Y.H. Cho, and B.J. Kim, “Fabrication of nano-structures using novel nano/micro contact printing technique”, The 2nd International Conference on NNT (Nanoimprint and Nanoprint Technology), Boston, Massachusetts, USA, 3-5, December (2003)
[4] 星泰雄、川井茂樹、小林大、金長吉、趙永學、竹内昌治、金範埈、川勝英樹、“カンチレバーのねじれ固有振動を用いた自己組織化単分子膜の観察”, 第64回応用物理学会学術講演会講演予稿集. No.2 (2003) 606
[3] 趙永學、高間信行、藤田博之、金範埈、“シャドウマスクを利用した鋭利な尖端を持つシリコンマイクロプローブカードの製作”, 精密工学会 第8回「知能メカトロニクス」ワークショップ講演論文集、平成15 年8 月21 - 22 日, 立命館大学理工学部, (2003) 51-56
[2] Y. Hoshi, S. Kawai, D. Kobayashi, J.G. Kim, Y.H. Cho, S. Takeuchi, B.J. Kim, and H. Kawakatsu, “Observation of self-assembled monolayer by using lateral resonance of the cantilever”, in Proc. of The 11th International Colloquium on Scanning Probe Microscopy, (2003) 105
[1] Younghak Cho, Tony Kuki, Yamato Fukuta, Hiroyuki Fujita, and Beomjoon KIM, “Si-based micro probe card with sharp knife-edged tips combined metal deposition”, Proc. of the 12th. Int. Conference on Solid-State Sensors, Actuators and Microsystems (Transducer’03), Boston, Massachusetts, USA, 8-12, June (2003) 774-777
◾ 김인겸, 유지원, 장혜경, 정지원, 김남현, 조영학, POCT용 마이크로칩 제작, 한국생산제조학회 2023 추계학술대회 초록집, 제주 라마다 호텔, 2023조영학
◾ 장재경, 조영서, 조영학, 십자형 단면 형상을 가진 미세 유체채널에서의 비뉴턴 유체를 이용한 마이크로/나노 입자 분리, 한국생산제조학회 2023 추계학술대회 초록집, 제주 라마다 호텔, 2023조영학
◾ 오별님, 조영서, 박재원, 조영학, 김현수, A high-throughput uniform-sized droplet generation with triangular cross-section channel device, 2023 한국바이오칩학회 추계학술대회 논문집, 제주 신화월드, 2023조영학
◾ 조영서, 이상욱, 조영학, 긴 직선 직사각형 마이크로 채널을 이용한 점탄성 유체 내 마이크로/ 나노 입자 집중 및 정렬, 대한기계학회 2023년 학술대회 논문집, 인천 송도컨벤시아, 2023조영학
◾ 송진혁, 장재경, 조영학, T자형 단면형상을 가진 미세채널에서 sheath flow를 이용한 관성 입자 분리, 대한기계학회 2023년 학술대회 논문집, 인천 송도컨벤시아, 2023조영학
◾ 국새롬, 조영서, 조영학, 관성력과 음파영동력을 이용한 단일 입자의 정렬 및 미세액적 내 캡슐화, 대한기계학회 2023년 학술대회 논문집, 인천 송도컨벤시아, 2023조영학
◾ 전성현, 김성우, 조영학, 고종횡비 미세 채널에서의 입자의 크기 별 분리 및 계수, 대한기계학회 2023년 학술대회 논문집, 인천 송도컨벤시아, 2023조영학
◾ 조영서, 조영학, Simultaneous generation of monodisperse droplets with two different sizes using high-aspect-ratio asymmetric cross-sectional channel, PRESM2023 Program book, 일본 오키나와, 2023조영학
◾ 장재경, 이상욱, 조영학, PDMS-유리 미세유체 디바이스를 이용한 입자의 연속 흐름 음파 트래핑, 한국생산제조학회 2023 춘계학술대회 논문집, 강원도 강릉 세인트존스 호텔, 2023조영학
◾ 박희범, 조영학, 마름모 단면 형상을 가진 미세 채널에서의 Poly(ethylene oxide) 농도 구배 기반 입자 사전 정렬 및 분리, 한국생산제조학회 2023 춘계학술대회 논문집, 강원도 강릉 세인트존스 호텔, 2023조영학
◾ 차수진, 김규빈, 박민주, 심혜우, 오별님, 조영서, 조영학, 김현수, 평행사변형 채널 구조를 활용한 고 민감도 압력 센서 개발, 한국생산제조학회 2023 춘계학술대회 논문집, 강원도 강릉 세인트존스 호텔, 2023조영학
◾ 오별님, 조영서, 박재원, 조영학, 김현수, A HIGH-THROUGHPUT UNIFORM-SIZED DROPLET GENERATOR WITH A TRIANGULAR CROSS-SECTION CHANNEL FABRICATED BY SIMPLE MEMS PROCESS AND SELF-ALIGNMENT, Technical Program book by Transducers2023, Kyoto, Japan, 2023조영학
◾ 송진혁, 장재경, 조영학, 뉴턴 유체와 점탄성 유체의 공동 흐름을 이용한 T 자형 단면 형상을 가진 미세채널에서의 입자 분리, 2023년 제25회 한국 MEMS 학술대회 논문집, 제주 부영호텔, 2023조영학
◾ 장재경, 안지연, 조영학, Particle separation using a microfluidic channel with cruciform section, Proceedings of the 9th International Conference on Manufacturing, Machine Design and Tribology, 제주 라마다 호텔, 2023조영학
◾ 김성우, 안지연, 이상욱, 조영학, 고세장비 미세채널을 이용한 마이크로/나노 입자 사전 정렬 및 분리, 2022 한국생산제조학회 추계학술대회 논문집, 라마다프라자 제주, 2022조영학
◾ 박희범, 김의환, 조영학, 마름모 단면 형상을 가진 미세 유체 채널에서의 탄성-관성 입자 분리, 2022 한국생산제조학회 추계학술대회 논문집, 라마다프라자 제주, 2022조영학
◾ 한진우, 김의환, 이상욱, 조영학, 미세조류 분리 효율 향상을 위한 관성집중 마이크로채널이 통합된 음파영동 장치, 2022 한국생산제조학회 추계학술대회 논문집, 라마다프라자 제주, 2022조영학
◾ 장재경, 안지연, 조영학, 십자형 단면 형상을 가진 미세채널에서의 나노 입자 집중, 대한기계학회 2022년 추계학술대회 논문집, 제주국제컨벤션센터, 2022조영학
◾ 조영서, 오별님, 김현수, 김정우, 조영학, 비대칭 단면을 갖는 미세 유체 채널에서의 단분산 액적 생성, 대한기계학회 2022년 추계학술대회 논문집, 제주국제컨벤션센터, 2022조영학
◾ 김의환, 한진우, 황지홍, 이상욱, 조영학, 관성집중 마이크로채널이 통합된 음파영동 디바이스를 이용한 미세조류 분리, 한국생산제조학회 2022년도 춘계학술대회 논문집, 강릉 세인트존스 호텔, 2022조영학
◾ 김성우, 김보현, 이상욱, 조영학, 고종횡비 미세채널에서의 나노입자 집중 및 분리, 한국생산제조학회 2022년도 춘계학술대회 논문집, 강릉 세인트존스 호텔, 2022조영학
◾ 심대보, 양찬영, 조영학, 김보현, 기계적 가공을 이용한 초경합금의 V 자형 미세 채널 가공, 2022 년도 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 더케이호텔 서울, 2022조영학
◾ 김의환, 이상욱, 조영학, Acoustophoretic microfluidic device with inertial prefocusing channel for efficient particle and blood cell separation, ICMTE2022 논문집, 일산 킨텍스, 2022조영학
◾ 김성우, 조영학, 고세장비 미세채널을 가진 디바이스를 이용한 마이크로/나노 입자 분리, 한국정밀공학회 2022년도 춘계학술대회 논문집, 제주 라마다호텔, 2022조영학
◾ 김의환, 조영학, 마름모 단면 형상의 미세 채널을 이용한 엑소좀 분리, 한국정밀공학회 2022년도 춘계학술대회 논문집, 제주 라마다호텔, 2022조영학
◾ 조영서,오별님, 김현수, 조영학, 실리콘 이방성 습식 식각과 자가정렬을 이용한 Step Emulsification 디바이스 제작, 제24회 한국 MEMS 학술대회 논문집, 제주 부영호텔, 2022조영학
◾ 장재경, 김의환, 김태훈, 조영학, 십자형 단면 형상을 가진 미세유체 채널에서의 탄성-관성 입자집중, 제24회 한국 MEMS 학술대회 논문집, 제주 부영호텔, 2022조영학
◾ 김의환, 오별님, 김현수, 이상욱, 조영학, 관성집중 마이크로채널이 통합된 음파영동 디바이스를 이용한 혈구 세포 분리, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주 칼호텔, 2021조영학
◾ 조영서, 오별님, 김현수, 조영학, 비대칭 단면의 고세장비 마이크로채널을 이용한 균일한 미세 액적 제작, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주 칼호텔, 2021조영학
◾ 장재경, 조영학, T 자형 단면 형상을 가진 미세채널을 이용한 입자 집중 및 분리, 한국정밀공학회 2021년도 추계학술대회 논문집, 부산 벡스코, 2021조영학
◾ 박지수, 조영학, 실리콘 나노와이어 FET 기반의 바이오센서를 이용한 방사선 피폭 단백질 검출, 한국정밀공학회 2021년도 추계학술대회 논문집, 부산 벡스코, 2021조영학
◾ 안선민, 권주용, 조영학, 고효율 입자 분리를 위한 음파영동 디바이스와 관성집중 마이크로 채널의 통합, 한국생산제조학회 2021년도 춘계학술대회 논문집, 강릉 세인트존스 호텔, 2021조영학
◾ 권주용, 김의환, 황지홍, 김보현, 조영학, 고종횡비 미세유체 디바이스를 이용한 점탄성 유체 내 미세입자 분리, 한국생산제조학회 2021년도 춘계학술대회 논문집, 강릉 세인트존스 호텔, 2021조영학
◾ 김의환, 장재경, 조영학, 요철 형상의 단면을 가진 미세채널 내에서의 탄성-관성 입자 집중 현상, 2021년도 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 부산 라발스 호텔, 2021조영학
◾ 이의석, 양찬영, 조영학, 김보현, PCD 공구를 이용한 단결정 SiC의 미세 구멍 가공에 대한 연구, 한국정밀공학회 2021년도 춘계학술대회 논문집, 온라인 개최, 2021조영학
◾ 김의환, 권주용, 김태훈, 조영학, 등변육각형 단면 형상의 미세 채널 내에서의 입자 집중 현상, 제23회 KMEMS 학술대회 논문집, 충남 부여, 2021조영학
◾ 권주용, 조영학, 마름모 단면을 가진 미세채널 내 점탄성 유체에서 나노입자 탄성-관성 집중 현상, 제23회 KMEMS 학술대회 논문집, 충남 부여, 2021조영학
◾ 김예빈, 김용화,김성동,조영학, Micro LED 전사기술을 위한 진공 척 개발, 대한기계학회 프로그램북, 온라인 , 2020조영학
◾ 권주용, 김태훈, 김정우, 조영학, 점탄성 유체의 마름모 미세채널 내에서의 탄성-관성 입자 집중, 한국생산제조학회 2020년도 추계학술대회 논문집, 제주도, 2020조영학
◾ Sinan Yigit, Song-I Han, Younghak Cho, Arum Han, BINARY PARTICLE ACOUSTOPHORESIS SEPARATION BASED ON NODAL POSITION ADJUSTMENT THROUGH PDMS WALL, µTAS 2020, Online, 2020조영학
◾ 지현영, 조영학, 이재훈, 김현수, 오영탁, 평행사변형 단면의 고세장비 마이크로채널을 이용한 균일한 미세 액적 제작, 한국정밀공학회 2020년도 통합학술대회 논문집, 온라인, 2020조영학
◾ 권주용, 이예은, 조영학, 마름모 마이크로채널 내 뉴턴 유체와 점탄성 유체에서의 입자 집중, 한국정밀공학회 2020년도 통합학술대회 논문집, 온라인, 2020조영학
◾ 권주용, 조영학, 마름모 단면 형상의 마이크로 채널에서 관성집중을 이용한 입자 분리, 제22회 KMEMS 학술대회 논문집, 강원도 평창, 2020조영학
◾ 이예은, 권주용, 이상욱, 조영학, 고효율 입자 분리를 위한 음파영동 디바이스와 관성집중 마이크로 채널의 통합, 제22회 KMEMS 학술대회 논문집, 강원도 평창, 2020조영학
◾ 이준원, 오영탁, 조영학, Photoresist thermal reflow 공정을 통한 장초점 마이크로렌즈 어레이의 제작과 reflow 온도와의 관계, 2019 한국생산제조학회 추계학술대회 초록집, 제주 KAL호텔, 2019조영학
◾ Kelu Peng, Sunghyun Cho, Junyi Yao, Younghak Cho, Hyun Soo Kim, Jaewon Park, LIQUID METAL-EMBEDDED MICROFLUIDIC PRESSURE SENSOR FOR REAL-TIME MONITORING, Proceedings of microTAS 2019, 스위스 바젤, 2019조영학
◾ Hyun Soo Kim, Sunghyun Cho, Hyesoo Park, Kang-Ho Lee, Ohwon Kwon, Younghak Cho, Jaewon Park, LABEL-FREE DROPLET DETECTION THROUGH 3D ELECTORDE-BASED IMPEDANCE SPECTROSCOPY, Proceedings of microTAS 2019, 스위스 바젤, 2019조영학
◾ 조영학, 이동기, 김현수, 권주용, 이방성 습식 식각 및 물리적 정렬을 이용한 고세장비 마이크로채널의 제작, 한국정밀공학회 2019년도 춘계학술대회 논문집 , 제주, 2019조영학
◾ 이동기, 조영학, 실리콘 습식 식각 공정 및 미세전사 몰딩법을 이용한 소유성 표면 제작, 2019 한국생산제조학회 춘계학술대회 초록집, 강원도 평창 알펜시아, 2019조영학
◾ 이동기, 권주용, 조영학, FABRICATION OF SI NANOWIRE PHOTODETECTOR USING SIMPLE WET ETCHING PROCESS, Proceedings of ICMDT2019, 일본 가고시마, 2019조영학
◾ 이예은, 이동기, 홍기연, 조영학, 기하학적 상사성과 모세관력을 이용한 비대칭 구조물을 가지는 이방성 젖음 표면 제작, KMEMS 2019 학술대회 프로시딩, 제주 KAL 호텔, 2019조영학
◾ 지수진, 이동기, 김보현, 조영학, 유체 채널 내 PDMS wall 을 포함한 음파영동 미세유체 디바이스 제작, KMEMS 2019 학술대회 프로시딩, 제주 KAL 호텔, 2019조영학
◾ 권주용, 이동기, 김정우, 조영학, 다양한 종횡비를 가지는 평행사변형 마이크로 채널에서의 입자 집중 현상, KMEMS 2019 학술대회 프로시딩, 제주 KAL 호텔, 2019조영학
◾ 이혁진, 박지수, 조영학, 실리콘 나노와이어 FET 센서의 제작 및 액중에서의 전기적 특성 평가, 대한기계학회추계학술대회, 강원랜드 컨벤션센터, 2018조영학
◾ 이고은, 고형덕, 조영학, 태양전지 Upconversion 효율 향상을 위한 Microlens array 설계 및 제작, 한국정밀공학회 추계학술대회집, 전북군산 컨벤션센터, 2018조영학
◾ Joo Yong Kwon, Dong-Ki Lee, Jaewon Park, Chiwan Koo, Young Hak Cho, Fabrication of Microchannel with Various Cross-Sectional Shapes, APCOT2018 Proceeding, 홍콩 과기대, 2018조영학
◾ 김보현, 이평안, 나융, 박민수, 조영학, 석영의 미세 구멍가공에서 희생층을 이용한 출구 크랙 예방, 한국정밀공학회 추계학술대회집, 제주 라마다 호텔, 2018조영학
◾ 권주용, 이동기, 조영학, 기하학적 상사성을 이용한 평행사변형 단면을 가지는 마이크로채널 제작, 제20회 한국 MEMS 학술대회 Proceeding, 제주 KAL호텔, 2018조영학
◾ 홍기연,이동기, 김성동, 조영학, Transfer molding 을 이용한 역사다리꼴 구조물을 가지는 소유성 표면 제작, 제20회 한국 MEMS 학술대회 Proceeding, 제주 KAL호텔, 2018조영학
◾ 김선준, 이용찬, 김동수, 김병성, 최원영, 조영학, 원심분리형 커피 고액 분리기, 한국생산제조학회 2017년도 추계학술대회, 제주, 2017조영학
◾ 장동주, 조영학, 이치범, Development of a portable on-site fluorescent system to detect microalgae living in rivers, ICMTE 2017 (International Conference of Manufacturing Technology Engineers 2017), 중국 심천, 2017조영학
◾ Yunjung Choi, Chibum Lee, Younghak Cho, Fabrication of finger-squeezing microfluidic pumping system for portable lab-on-a-chip, ICMTE 2017 (International Conference of Manufacturing Technology Engineers 2017), 중국 심천, 2017조영학
◾ Sinan Yigit, Song-I Han, Young-hak Cho, Arum Han, STAIRCASE ECHO-Life SciencesCHANNEL ACOUSTOFLUIDIC DEVICE FOR CELL POSITION CONTROL, Proceedings of microTAS 2017, 미국 조지아주 사바나, 2017조영학
◾ 조영학, 한아름, 김성, 벌크탄성파에 기반한 폴리머 음파영동 미세유체 칩을 이용한 입자분리, 한국정밀공학회 2017년도 춘계학술대회논문집, 제주, 2017조영학
◾ Dong-Ki Lee, Minsoo Park, Younghak Cho, Wettability of Hybrid Surface with Hydrophobic and Hydrophilic Properties, Proceedings of The 7th International Conference on Manufacturing, Machine Design and Tribology, 제주, 2017조영학
◾ 이동기, 조영학, 실리콘 식각 공정을 이용한 임의 각도를 가지는 그루브 구조물의 제작, 제19회 한국 MEMS 학술대회 논문집, 제주, 2017조영학
◾ 이동기, 조영학, 김한글, 신인주, 박민수, 그루브 형상의 복합 표면 유리 제작, 한국정밀공학회지, 전남 여수, 2016조영학
◾ 이동기, 조영학, Anisotropic Flow on Superoleophobic Surface with Grooved Mushroom Structure, International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI2015), Kaohsiung, Taiwan, 2015조영학
◾ 신호철, 조영학, 폴리머로의 전사방법을 이용한 실리콘 나노구조물 어레이가 임베디드된 필름 제작, 2015 한국생산제조시스템학회 추계학술대회지, 제주칼호텔, 2015조영학
◾ 김보현, 조영학, 김선길, 이평안, 방전가공을 이용한 미세 기둥 가공, 한국정밀공학회 2015 춘계학술대회지, 제주라마다호텔, 2015조영학
◾ Hocheol Shin, Dong-Ki Lee, Seong Keol Kim, Young Seog Kim, Younghak Cho, Fabrication of Si Nanowire-based Photodetector on Flexible Polymer Substrate using Pattern Transfer Method, ICMDT 2015 Proceedings (6th International Conference on Manufacturing, Machine Design and Tribology), 일본 오키나와, 2015조영학
◾ 손정민, 조영학, 적외선 현미경을 이용한 실리콘 나노와이어 히터의 과도 열 특성 분석, KMEMS 2015 논문집, 제주칼호텔, 2015조영학
◾ 이동기, 김신형, 김영훈, 조영학, 좌성훈, 간접 LED 면조명기기의 배광을 위한 마이크로 렌즈 배열 확산판 제작, KMEMS 2015 논문집, 제주칼호텔, 2015조영학
◾ 이은행, 이동기, 조영학(교신저자), Study on Anisotropic Flow of Droplets on Superoleophobic Surface with Grooved Mushroom Structures, 한국정밀공학회 2014년도 추계학술대회논문집, 창원, 2014조영학
◾ Jung Min Son, Young Hak Cho, Complementary temperature measurement methods of micro-heater using fluorescent dye and Infrared microscope, International Conference of Manufacturing Technology Engineers, Jeju, 2014조영학
◾ Sin Hyeong Kim, Min Gu Kim, Jeong Jin Kang, Pyeong An Lee, Bo Hyun Kim and Young Hak Cho, Micro/nano-hybrid lens for enhancing light extraction using micromilling and anodic aluminum oxide (AAO), International Conference of of Manufacturing Technology Engineers, Jeju, 2014조영학
◾ 양승우, 김신형, 이은행, 김보현, 조영학, Fabrication and characteristic of polymer microlens using solvent vapor assisted reflow, Journal of the Korean Society of Manufacturing Technology Engineers, 제주, 2014조영학
◾ Dong-Ki Lee, Gi Young Lee, Hyungduk Ko, Younghak Cho, ULTRAVIOLET PHOTODETECTOR BASED ON ZINC OXIDE NANOWIRES ON SUSPENDED SILICON NANOWIRE WITH FAST PHOTORESPONSE TIME, Asia-pacific Conference on Transducers and Micro&Nano Technologies, 대구 EXCO, 2014조영학
◾ S.H.Kim, S.K.Hong, J.J.Kang, B.H.Kim and Y.H.Cho, FABRICATION OF MICRO/NANO-HYBRID POLYMER LENS USING MICRO-MILLING AND ANODIC ALUMINUM OXIDE (AAO) METHOD, Asia-pacific Conference on Transducers and Micro&Nano Technologies, 대구 EXCO, 2014조영학
◾ 조영학, 김보현, 박근, Fabrication of Superhydrophobic Surface using Ultrasonic Imprinting, 한국정밀공학회 학술발표대회 논문집, 제주, 2014조영학
◾ 이동기, 이은행, 조영학, Fabrication of Superoleophobic Surface with Anisotropic Wettability Using Silicon Wafer, Journal of the Korean Society of Manufacturing Technology Engineers, 창원, 2014조영학
◾ 이동기, 이기용, 고형덕, 조영학, 실리콘 나노구조물 위에 성장된 산화아연 나노선 기반의 저전력 자외선 센서, KMEMS, 제주 KAL 호텔, 2014조영학
◾ 석영 기반 고세장비 미세 채널 및 구조물 제작, 제16회 한국 MEMS 학술대회 논문집, 2014조영학
◾ Simple fabrication of Si micro/nano- structure and its application, 나노 임프린트 몰딩 프린트 학술대회 논문집, 2014조영학
◾ 손정민, 이준형, 조영학, Temperature Distribution Measurement of Au Micro-heater in Microfluidic Channel using IR Microscope, ASPEN 2013 proceeding, Taipei, 2013조영학
◾ 이준형, 박창용, 조영학, Thermal Characterization of High-aspect-ratio Nano-heaters using IR Thermography for Bio-molecule Manipulation, ASPEN 2013 Proceeding, Taipei, 2013조영학
◾ 김신형, 조영학, 김보현, 솔벤트 증기 처리 리플로우 방법을 이용한 폴리머 마이크로 렌즈 제작, 한국정밀공학회 2013년도 추계학술대회 논문집, 부산 EXCO, 2013조영학
◾ 윤류리, 조영학, 이준형, 김성만, 한아름, 플라즈마 본딩을 이용한 PMMA 미세 유체 디바이스 제작 및 응용, 한국정밀공학회 2013년도 추계학술대회 논문집, 부산 BEXCO, 2013조영학
◾ 손정민, 조영학, 이준형, 적외선 현미경을 이용한 마이크로 채널 내부에서 마이크로 히터의 온도 분포 측정 방법, 한국정밀공학회 2013년도 추계학술대회 논문집, 부산 BEXCO, 2013조영학
◾ Jun Hyung Lee, Ji Hyoung Roh, Kyu Sik Shin, Dae Sung Lee, Jin Ah Lee, Soyoun Kim, Young Hak Cho, Development of Label-Free Biosensor Based on Aptamer-Modified Si Nanowire Field Effect Transistor (FET) using Top-down Approach and Sol-gel Method, MicroTAS 2013 Conference Proceeding, Freiburg, 2013조영학
◾ Han Wang, Zhongzheng Liu, Dong M. Shin, Zhuo Chen, Younghak Cho, Dong-Young Jang, Yong-Joe, Arum Han, Acoustophoretic force-based compressibility measurement of cancer cells having different metastatic potential, Proceedings of Meetings on Acoustics, Montreal, Canada, 2013조영학
◾ Han Wang,Zhongzheng Liu,Chiwan Koo,Sungman Kim,Younghak Cho,Dong-Young Jang,Yong-Joe Kim,Arum Han, Acoustic standing wave based microsystem for low-concentration oil detection and separation, Proceedings of Meetings on Acoustics, Montreal, Canada, 2013조영학
◾ 이동훈, 조영학, 양방향 로봇형 판유리 이송 장치, 2013한국생산제조시스템학회 춘계학술 논문집, 부산 BEXCO, 2013조영학
◾ 이동기, 이준형, 조영학, Effects of Grooved Surface with Nano-ridges on Amplification of Hydrophobic Property, Advances in Applied Materials and Electronics Engineering II, Hong Kong, 2013조영학
◾ 이동기, 이준형, 조영학, 실리콘 기판 위에 제작된 그루브 형태의 나노 크기 구조물을 가진 표면의 이방성 젖음에 관한 연구, 제15회 한국 MEMS 학술대회 논문집, 제주 KAL호텔, 2013조영학
◾ 이준형, 조영학, 김성만, 박상희, 허준혁, Mask design for Uniformity of Si Nanowire fabricated by Top-down approach in 8-inch class large area, Proceedings of KSPE 2012 Autumn Conference, 제주 라마다 호텔, 2012조영학
◾ 강혜옥, 조영학, 박태규, A study on the components of pen-type piezoelectric dispenser for microarrays, Proceedings of KSPE 2012 Autumn Conference, 제주 라마다 호텔, 2012조영학
◾ 김신형, 조영학, 김성만, 이준형, Shape error and its compensation in photoresist thermal reflow method used for the fabrication of microlens array mold, Proceedings of KSPE 2012 Autumn Conference, 광주과학기술원 오룡관, 2012조영학
◾ 조영학, 송준엽, 김신형, 이평안, 김보현, Fabrication of Polymer Microlens using Hot-embossing and Solvent Vapor Polishing, 2012년도 제9회 금형가공 심포지엄, 메이필드호텔 오키드홀, 2012조영학
◾ 김성만, 조영학, 이준형, 노지형, 이대성, A Comparative Study on the Electrical Characterization of Top-down Fabricated Silicon Nanowire ISFET, Proceedings of KSPE 2012 Spring Conference, 제주 라마다 호텔, 2012조영학
◾ 송준엽, 조영학, 김보현, 김신형, Fabrication of Polymer Microlens Array using Hot-embossing and Vapor Solvent Polishing, Proceedings of KSPE 2012 Spring Conference, 제주 라마다 호텔, 2012조영학
◾ SungMan Kim, SungDong Kim, ShinYoung Kim, JungJoong Lee, DongWon Chun and WonYoung Jeung, The Influence of Substrate Bias on the Texture Control and Performance of Cr-V Underlayer for L10 FePt Thin Films, IEEE International magnetics Conference, 벤쿠버, 2012조영학
◾ 김용훈, 조영학, Development of Biodiesel Production Equipment from Animal Fats, 2012 KSMTE Spring Conference, 제주 KAL 호텔, 2012조영학
◾ 김성만, 조영학, 황지홍, 적외선 열화상 측정기법을 이용한 나노와이어 히터의 온도분포 비교, 한국 MEMS 학술대회 논문집, 제주, 2012조영학
◾ 김용훈, 김동하, 바이오 디젤 제조용 장치 개발 및 라드 유를 원료로 한 바이오 디젤 반응 조건 고찰, 한국정밀공학회 추계학술대회 논문집, 경주, 2011조영학
◾ 하상헌, 음향파를 이용한 폴리머 기반의 혈구 및 혈장 분리칩 제작, 한국정밀공학회 추계학술대회 논문집, 경주, 2011조영학
◾ HF-etched Glass Substrate for the Optical Readout of Sol-gel Microarrays, MNC2011 Conference Proceedings, 일본 교토, 2011조영학
◾ 김대진, 김성원, 김선경, 유영은, Flow Instability of Polypropylene Melt in Micro-Injection Molding, The 6th Korean-Australian Rheology Conference 2011, 대전, 2011조영학
◾ 박시환, 이우일, Injection molding of high-aspect-ratio structures using flexible polymer stamper, ICA3M, 서울테크노파크, 2011조영학
◾ 김명재, 황지홍, 배윤기, 적외선 열화상 측정을 이용한 나노와이어 히터의 온도분포 측정, 한국정밀공학회 춘계학술대회 논문집, 제주, 2011조영학
◾ Development of Automatic Jig Vise Mechanism for CNC Milling Machine, The 4th International Conference on Manufacturing, Machine Design and Tribology, Gamagori, Aichi, Japan, 2011조영학
◾ Development of Grinding Mechanism for the OrthoMTA Compacters, The 4th International Conference on Manufacturing, Machine Design and Tribology, Gamagori, Aichi, Japan, 2011조영학
◾ 마이크로채널 내 Al2O3 나노유체의 압력강하 연구, 대한설비공학회 2010 동계학술발표대회 논문집, 2010조영학
◾ 배윤기, 황지홍, 김성동, 김명재, SU-8 포토레지스트를 이용한 BOMORPH Thermal Microactuator의 제작 및 온도 측정, 2010 한국정밀공학회 추계학술대회 논문집, 경남창원, 2010조영학
◾ Fabrication and Temperature Measurement of Bimorph Thermal Micro actuator using SU-8 Photoresist, 한국정밀공학회 2010년도 추계학술대회 논문집, 2010조영학
◾ 이강호, 배윤기, 김성동, KOH 이방성에칭을 이용한 나노채널 및 나노와이어 제작, 2010 한국정밀공학회 추계학술대회 논문집, 경남창원, 2010조영학
◾ Nanostructure fabrication without nanolithography and its application, 2010년도 추계학술대회 강연 및 논문 초록집, 제주도, 2010조영학
◾ 김현수, 김범준, 한아름, 실리콘 나노임프린팅 및 솔벤트증기를 이용한 폴리머 나노채널 제작, 2010 한국정밀공학회 춘계학술 대회 논문집, 제주도, 2010조영학
◾ 원영재, 맹희영, 공작기계 멀티 지그 바이스용 조오-웨지 기구 개발, 2010 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 2010조영학
◾ 김범준, 한아름, 몸체 미세가공기술을 이용한 단일 생체분자 검출용 극초미세 이산화 실리콘 채널의 제작 및 분석, 2010 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 제주도, 2010조영학
◾ 박재원, 한아름, Fabrication of curve-typed polymer nanochannel using polymer layer transfer and collapse technique, 제12회 한국 MEMS 학술대회 논문집, 부산, 2010조영학
◾ Electrical impedance spectroscopy microsystem as a tool for cancer cell analysis, Proceedings of ASME 2010 First Global Congress on NanoEngineering for Medicine and Biology(NEMB2010), Houston, 2010조영학
◾ Lateral Flow Particle Filtration and Separation with Multilayer Microfluidic Channels, EIPBN 2009, Florida, 2009조영학
◾ J. ark, H. Park, X. Cheng, B.J. Kim, A. Han, FABRICATION OF HIGH-ASPECT-RATIO NANOCHANNELS USING NOVEL NANOSCALE SILICON MOLD AND SOLVENT ASSISTED SEALING, Nanotech2009, 휴스턴, 2009조영학
◾ CURVED POLYMER NANOCHANNEL FABRICATION USING PMMA LAYER TRANSFER AND COLLAPSE, Nanotech 2009, 미국 휴스턴, 2009조영학
◾ Curved Polymer Nanochannel Fabrication using PMMA Layer Transfer and Collapse, Nanotech 2009 Conference, 2009조영학
◾ Fabrication of High-Aspect-Ratio Nanochannels using Novel Nanoscale Silicon Mold and Solvent Assisted Sealing, Nanotech 2009 Conference, 2009조영학
◾ NANOCHANNEL FABRICATION FOR SINGLE DNA ANALYSIS, HSEMB 2009, Houston, 2009조영학
◾ WHOLE CELL IMPEDANCE ANALYSIS OF METASTATIC AND NON-METASTATIC CANCER CELLS, MEMS2009 Technical Digest, 프랑스 소렌토, 2009조영학
◾ H.S. Kim(김현수), A.B. Frazier, G. Chen, D. Shin, and A. Han(한아름), Whole Cell Impedance Measurement Analysis for Metastasis Discrimination Metastatic and Non-Metastatic of Head and Neck Cancer Cells, Proceedings of JMEMS'09 - 직접입력, IEEE, 2009조영학
◾ Simple fabrication of Si nanowire and its biological application as nanoscale heat source, MRS, 2008조영학
◾ Y.T. Cheng, N. Takama, B.J. Kim(김범준), Simple fabrication of Si nanowire and its biological application as nanoscale heat source, Proceeding of International Materials Research Conference - 직접입력, MRS, 2008조영학
◾ Nanochannles for Single DNA Analysis Using Various Fabrication Methods, International SoC Design, 2007조영학
◾ Fabrication of Silicon dioxide nanochannel arrays without nanolithography for single DNA detection, Technical proceedings, 코펜하겐, 2007조영학
◾ S.W. Lee(이상욱), M.T. Hwang(황문태), T. Fujii and B.J. Kim(김범준), Fabrication of Silicon dioxide nanochannel arrays without nanolithography for single DNA detection, Technical Digest-MNE2007 - 직접입력, MNE2007, 2007조영학
◾ S.W. Lee(이상욱), B.Le Pioufle, N. Takama, S. Takeuchi, T. Fujii and B.J. Kim(김범준), HIGH-THROUGHPUT SINGLE-CELL ELECTROPORATION MICROCHIP WITH THREE DIMENSIONAL SI MICROELECTRODES FOR GENE TRANSFECTION, Proceedings of Transducers2007 - 직접입력, IEEE, 2007조영학
◾ High-throughput Singl-cell Electroporation Microchip with Three Dimensional Si Micorelectrodes for Gene Transfection, Transducers2007, 서울, 2007조영학
Books
◾ 마스자와 타카히사 저, (알기 쉬운) 마이크로 가공기술, 역서, 978-89-336-0835-7, 기전연구사, 2011조영학
Patents
◾ 더치커피 제조장치, 특허 등록, 대한민국, 2016조영학
◾ 양방향 로봇이송장치, 특허 등록, 대한민국, 2014조영학
Projects
◾ 광조형 3D프린터용 대면적 마이크로 렌즈어레이 제작, (주)캐리마, 2019.09.~2020.01.조영학
◾ 기하학적 상사성과 모세관력을 이용한 비대칭 구조물을 가지는 이방성 젖음 표면 제작, 산학협력단, 2019.03.~2020.02.조영학
◾ 방사선의공학 바이오칩 디바이스 기술 개발, 한국원자력의학원, 2019.01.~2023.12.조영학
◾ 폴리머 마이크로 구조물 슬라이드 제작, (주)이바이오젠, 2018.12.~2019.01.조영학
◾ 실리콘 이방성 습식 에칭과 자가정렬을 이용한 평행사변형 단면을 가지는 마이크로채널 제작, 산학협력단, 2018.07.~2019.06.조영학
◾ BioChip과 Chamber의 bonding 조건 최적화, (주)에이엠에스, 2018.04.~2018.07.조영학
◾ 스리랑카 콜롬보 중앙직업훈련원 및 감파하 고등기술센터 건립사업 교육훈련 위탁용역, 대외경제협력기금, 2017.08.~2018.06.조영학
◾ 패턴 전사법과 실리콘 몰드-PDMS 스탬프 간의 자가정렬을 이용한 소유성 표면 제작, 산학협력단, 2017.07.~2018.02.조영학
◾ 음파영동을 이용한 미세액적 내 입자분리 및 축적용 마이크로플루이딕 시스템개발, 한국연구재단, 2017.06.~2020.05.조영학
◾ 이미지 인식 기술을 이용한 비접촉식 마이크로어레이어 개발, 중소기업기술정보진흥원, 2017.06.~2019.05.조영학
◾ 불산 증기 에칭을 이용한 유리 마이크로렌즈 제작, 산학협력단, 2015.12.~2016.11.조영학
◾ 불산용액을 이용한 글라스의 표면 연마 분석 및 자문(12월), 삼성전자(주), 2015.12.~2015.12.조영학
◾ 불산 대체용액을 이용한 글라스 가공 후 발생하는 표면 상태 분석 및 측정에 관한 자문, 삼성전자(주), 2015.08.~2015.08.조영학
◾ 불산용액을 이용한 글라스의 표면 연마 분석 및 자문, 삼성전자(주), 2015.07.~2015.11.조영학
◾ 이종 혼합 솔벤트 증기를 이용한 PC 폴리머의 표면 연마 분석 자문, 삼성전자(주), 2015.06.~2015.06.조영학
◾ 다양한 솔벤트를 이용하여 PC 폴리머의 표면 연마 실험결과 분석 및 자문, 삼성전자(주), 2015.05.~2015.05.조영학
◾ 전사방법을 이용한 폴리머 필름에 내재된 실리콘 나노구조물 어레이 제작, 산학협력단, 2015.04.~2016.02.조영학
◾ 증기 연마용 용제 및 증기 연마 공정 개발(솔벤트를 이용한 폴리머 폴리싱 시 발생하는 문제점 및 적절한 폴리싱 조건에 관한 자문), 삼성전자(주), 2015.03.~2015.03.조영학
◾ 골과 연골의 복잡한 결손 조직재생을 위한 생체모방 기능의 구배형 조직재생용 생체재료에 대한 공동연구, 한국연구재단, 2014.12.~2017.11.조영학
◾ [LINC3차]더치프레소-Cold Brew Coffee용 디스펜서 개발, LINC, 2014.09.~2015.01.조영학
◾ 솔벤트 증기 처리 리플로우 방법을 이용한 폴리머 마이크로렌즈 제작, 산학협력단, 2014.07.~2015.06.조영학
◾ 산업융합연계형로봇창의인재양성, 한국산업기술진흥원, 2014.06.~2015.02.조영학
◾ 2014년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2014.03.~2015.02.조영학
◾ 실리콘 웨이퍼를 이용한 이방성의 젖음성을 가지는 초소유성 표면 제작, 산학협력단, 2014.03.~2015.02.조영학
◾ 서울과학기술대-원자력의학원 협력구축 사업연구, 산학협력단, 2013.11.~2014.02.조영학
◾ POCT 바이오칩 제조용 마이크로 디스펜서 제작 장치 개발, (주)아메드, 2013.09.~2014.02.조영학
◾ 디스플레이용 판유리 이송을 위한 양방향 이송 로봇장치의 개발, 산학협력단, 2013.09.~2014.02.조영학
◾ Photoresist thermal reflow 방법을 이용하여 제작한 마이크로렌즈 어레이의 형상 관련 오차 및 이에 대한 보정, 산학협력단, 2013.03.~2014.02.조영학
◾ 2013년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2013.03.~2014.02.조영학
◾ 동물성 유지를 원료로 한 바이오 디젤 제조 장치 개발, 산학협력단, 2012.09.~2013.02.조영학
◾ [LINC사업] 맞춤형연구과제 - 보급형 3축 제어 솔젤 마이크로어레이 장치 개발, 서울과학기술대학교 산학협력단, 2012.08.~2013.01.조영학
◾ Hot-Embossing 및 솔벤트 증기를 이용한 폴리머 마이크로 렌즈 어레이 제작, 산학협력단, 2012.05.~2013.08.조영학
◾ 적외선 열화상 측정기법 및 온도민감 형광물질을 이용한 액중 속 나노와이어히터의 온도 측정 및 캘리브레이션, 한국연구재단, 2012.05.~2015.04.조영학
◾ 2012년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2012.03.~2013.02.조영학
◾ 2단계 공학교육혁신센터지원사업, 한국산업기술진흥원, 2012.03.~2014.02.조영학
◾ 글로벌 경쟁력을 갖춘 산학협력 특성화 혁신센터 사업, 한국산업기술진흥원, 2010.07.~2012.02.조영학
Awarded
◾ Microchannel Fabrication on Glass Materials for Microfluidic Devices, IJPEM Highly commended Paper Award, The Korean Society for Precision Engineering, 2021조영학
